The pop-up window may be part of the installation process so let it run, don't close it, it should close itself after a short while. What does it say in the pop-up window anyway? ' microsoft network adapter multiplexor protocol' I don't even have that protocol available, installed or otherwise (Win7).
Windows 10 startup proceeds, but a message box is displayed informing you that the NdisImPlatform service has failed to start. Restore Default Startup Type for Microsoft Network Adapter Multiplexor Protocol Automated Restore. Select your Windows 10 edition and release, and then click on the Download button below. (Windows 10) 'One or more network protocols are missing on this computer' on ethernet connection. Everything but Microsoft Network Adapter Multiplexor Protocol.
Nothing has worked. I keep getting a message that the Ethernet cord is disconnected. The lights are not on at the port.
This driver is used for two scenarios in teaming. Both of these scenarios require at least two connected network adapters on a single PC. Scenario 1 (Adapter teaming): This is using two or more adapters at the same time. Doing this allows one to send and receive more packets than a single adapter could. Kitchen design software reviews. Scenario 2 (Adapter failover/high availability): This simply means there is a standby adapter that takes over the network connection if the primary fails. If you only have one adapter on your PC hooked up as is the likely case with your client OS enabling this protocol will result in Windows disabling it automatically as soon as it figures out you can’t team multiple adapters to work together on your PC. Conclusion This capability was introduced with Windows Server 2012 and remains more a server-side protocol than client based.
If you have gone through the internet, you may discover there is very little offering explanation to the Microsoft Network Adapter Multiplexor Protocol. My first challenge with this protocol was after I did an upgrade from Windows 8.1 to 10. I had no connectivity and noticed that all my protocols were unchecked. To regain connectivity I turned them back all on. If you have ever been in my shoes, you should know turning them back all on will never be possible.
Try installing the others. Its not a install window its a window to click client or protocols they are both empty because everything is installed im on win10 the microsoft network adapter multiplexor protocol whas in the protocol option.
Any idea how to fix this issue? I have access to wifi but its very poor. Yea I had this issue for several days and I read a lot of posts and forums and nothing seemed to work. Then one guy randomly in some thread mentioned going into the network adapter properties > configure > then go to advance tab up top > then in the list select speed and duplex > then change it from auto negotiation to highest option you have. After that it will show disconnected and then will attempt to reconnect. It fixed my issue and hopefully will fix yours.
Hi Cavil, Thank you for posting your query in Microsoft Community. We would be glad to help you with the issue you are facing today. I understand the difficulty with the problem. The issue that you are facing is more complex than what is typically answered in the Microsoft Answers forums.
I keep getting a message that the Ethernet cord is disconnected. The lights are not on at the port. I see a lot of others have this problem, but no fixes have worked for me yet. Any suggestions?
Microsoft Network Adapter Multiplexor Protocol (NdisImPlatform) Service Defaults in Windows 10 Microsoft Network Adapter Multiplexor Protocol. Default Settings Startup type: Manual Display name: Microsoft Network Adapter Multiplexor Protocol Service name: NdisImPlatform Service type: kernel Error control: normal Path:%SystemRoot% System32 drivers NdisImPlatform.sys Registry key: HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services NdisImPlatform Default Behavior Microsoft Network Adapter Multiplexor Protocol is a kernel device driver. In Windows 10 it is starting only if the user, an application or another service starts it.
Hi, Thank you for posting in Microsoft Community. • Do let us know, what is the exact issue you are facing with Microsoft Network Adapter Multiplexor Protocol? The Microsoft Network Adapter Multiplexor Protocol service is a kernel mode driver. The protocol is installed by default as part of the physical network adapter initialization for the first time.
The subreddit is only for support with tech issues. Please be as specific as possible.
I also updated/uninstalled/reinstalled the driver for my ethernet card. Didn't help at all. I have no access to my router because I'm on university internet.
This driver is used for two typical usage scenarios, each of which require at least two working (and connected) network adapters on a single PC. The first scenario is called adapter teaming, which means using two or more adapters at the same time, so that you can send and receive more packets than a single adapter could. The second scenario is called adapter failover/high availability, where a standby adapter takes over the network connection if the primary fails. If you only have one adapter on your PC hooked up (as I suspect is the case on your PC), or only one wired connection and one wireless connection, enabling this protocol will result in Windows disabling it automatically as soon as it figures out you can't team multiple adapters to work together on your PC. HTH, --Ed-- PS: this capability was introduced with Windows Server 2012, and remains mostly a 'server thing' to this day. I don't see or hear about it being used much, if at all, on the client side, including Windows 10 clients.
I have seen this tool help sometimes- it just automates a lot of first steps in troubleshooting connectivity problems. In fact, it might clean up your Network Connections: If you are not sure about how or if you should do anything here, ask first. I may have missed something - I am waiting for my food to be ready and I thought I could ramble off some starter ideas.
Don't ask us to compare or recommend products. Do not compare or recommend products. Keep all communication public, on the subreddit. Private messages and other services are unsafe as they cannot be monitored. 24 hours between posts to the subreddit is the absolute minimum. No soliciting of any kind. This includes asking for us to link to your subreddit, forum, bulletin board, newsgroup, Facebook page, whatever.
Click to expand. I found it because I'm going crazy trying to get Windows 10 to allow me to use an ethernet connection. I have checked everything. The router works, the cable works. I've updated the driver automatically, i went back to the old one. I downloaded the latest from the site and installed that. I made sure power settings are not automatically turning off the ethernet card.
I'm curious if other site members either use it themselves, or have seen it used, in that way. Why, if I may be so bold as to ask, did you seek to enable it?
They give you stickers! Hi, so my ethernet randomly stopped working today, seemed like a regular internet crash because it was just right out of the blue. However, it's been a few hours now and it still isn't working. When I used the troubleshooter on windows it said 'One or more network protocols are missing on this computer', which I googled and found instructions on how to fix it with command prompt. I used this (>netsh int ip reset c: resetLog.txt) after giving permission to do it in the registry, it said it worked and to restart my computer. However, when I restarted, the problem was still there, and when I tried to reset it again, the permissions to do that command was gone again, so I don't know if the reset really worked. I re-gave myself the permission and redid the command, restarted computer, and again nothing worked and permissions were gone again.
• File Uploader • • PasteBin • • Knowledge Base • • Subreddits • • • • • • • • • • • • • • • • Infections • • • Tools • Software • • • • • • • • • Tutorials • • Please use the 'Select Flair' button after making your thread. Sort by: or Check out our, all guides are compiled by our Trusted Techs. Ask us here at, and try to help others with their problems as well! Please include your system specs, such as Windows/Linux/Mac version/build, model numbers, troubleshooting steps, symptoms, etc.
I made sure power settings are not automatically turning off the ethernet card. Nothing has worked.
Or 2 – Right-click on the desktop and choose New > Shortcut > browse to (or type) C: Windows System32 mblctr.exe and click Next > Optionally type a different name for the shortcut > click Finish. Hi Eric, Excellent job. I will have to re-read the whole thing again My favorite is moving all the DOCS, Pix and Misc. To a separate drive. In this way, I can do more frequent OS backups that will not fill the backup drive too fast.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact tnmff@microsoft.com. Hi Nick, The Microsoft Network Adapter Multiplexor Protocol service is a kernel mode driver. This protocol is used for Netword Interface Card bonding, which is the combining of two ethernet cards to appear as one physical device in order to increase the available bandwidth. You just leave it by itself if you don't combine Ethernet.
Windows 10 Fast Startup Win10 sort-of has the ability to start faster. Labeled as a gimmick by some, this setting really never shuts down the computer, “” (unchanged for Win10). Allow the Geek in me to rephrase, “With fast boot, when you restart Windows 8 all the crud normally removed at shutdown will be there when you restart.” I understand some folks may find this feature helpful but I don’t. I want a lean, mean, fightin’ machine when I power up.
• No referral/affiliate-links. • Promoted Subreddits • - Office 365 Team communication service subreddit. • - Main Windows community for all versions of Windows. • - dedicated to Windows Mobile OS and discussions about it. • - dedicated to Windows Insider program, WI builds troubleshooting. • - Official Xbox Insiders community • - dedicated to Xbox One console and its peripherals, news and discussions. • - dedicated to Surface powerful laptop/tablet and discussions around it and its peripherals.
• - Android Operating system and its peripherals discussions. • - Apple devices, services discussions.
Suggestion: It would be great to compile everything into a PDF file that can serve as desktop reference. • Eric (a.k.a. TweakHound) says. This is funny and just for a point of reference I have worked in IT primarily in Computer and Network installation, support, maintenance for 21 years now and have read Eric’s guides since Windows XP as it is one of the easiest ways to get great info on the manipulation of Operating systems and he is about as complete as it gets. Anyway the way I organize my files is on seperate hard drives internally and with USB media containers most often now (I have 2 64 Gb’s I use and on 256 GB one as well given to me by Corsair.